fxs config

[chicagotechsolutions]

I was interested if anyone had any information on how to configure 2 fxs ports to work as regular analog phone extensions with my cisco callmanager (the fxs card is plugged into the nm-2v in my vg200). What does the config look like for the fxs ports? What kind of configuration do I have to do on the side of the callmanager? thx

 

[pndscm]

Are you looking to use H323 or MGCP to control the VG200?

 

[chicagotechsolutions]

using h323 ato control the vg200

 

[pndscm]

Here is a link to a Cisco page for H.323 IOS gateways:

http://www.cisco.com/en/US/products...s_feature_guide09186a0080087ac2.html#xtocid15

Here is a link to a Cisco page for H.323 Gateway config for CCM 4.1. It's essentially the same for all versions of CCM.

http://www.cisco.com/en/US/products..._guide_chapter09186a00803ed699.html#wp1311511