FXO, VOIP, 2811 + house phone line

[LCIS]

First, thanks for your time !

Router 2811 with 4x FXO card; I would like to receive call to my house phone line and in same time to my voip phone 7941. I can dial out without probleme, Here my basic setup:
Building configuration...

!
ip dhcp pool LAN
network 192.168.0.0 255.255.255.0
dns-server 24.201.245.77 24.200.241.37 24.200.243.189
default-router 192.168.0.1
option 150 ip 192.168.0.1
!
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 clear-channel
codec preference 4 g729r8
!
!
interface FastEthernet0/0
description LAN
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
!
interface FastEthernet0/1
description INTERNET
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
!
ip nat inside source list 1 interface FastEthernet0/1 overload
!
access-list 1 permit 192.168.0.0 0.0.0.255
!
!
voice-port 0/2/0
caller-id enable
!
voice-port 0/2/1
!
voice-port 0/2/2
!
voice-port 0/2/3
!
!
dial-peer voice 9 pots
destination-pattern 9
port 0/2/0
!
!
telephony-service
no auto-reg-ephone
max-ephones 10
max-dn 10
ip source-address 192.168.0.1 port 2000
system message VOIP
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn 1 dual-line
number 4000
description hardphone
name hardphone
!
!
ephone 1
device-security-mode none
mac-address 0023.5E1A.6E2E
type 7941
button 1:1
!
!
!
line con 0
logging synchronous
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
privilege level 15
logging synchronous
login local
transport input telnet ssh
line vty 5 15
privilege level 15
login local
transport input telnet ssh
!
scheduler allocate 20000 1000
end


LCIS TECH
LAND COMMUNICATION INFORMATION SYSTEM
DND

 

[whykap]

try this:

voice-port 0/2/0
caller-id enable
connection plar 4000

 

[LCIS]

Thanks for your response,

My setup right now is a RJ-11 spitter who's in voice-port 0/2/0, that spitter receive and distribute the phone line. With connection plar 4000 the problem is that everytime I call from my cell phone to my house my home phone line ring and my 7941 (that`s what I want) but when i pick up the line from my house phone the 7941 keep ringing and i can hear it from my cell phone.

What would be the config if I would like to plug the line from the phone compagny to voice-port 0/2/0 and distribute it from port 0/2/3.

Like you can see I do know much about VOIP... Thanks

LCIS TECH
LAND COMMUNICATION INFORMATION SYSTEM
DND

 

[LCIS]

Like you can see i dont know much about VOIP...


LCIS TECH
LAND COMMUNICATION INFORMATION SYSTEM
DND

 

[brianinms]

You would need an fxs card if you want to connect an analog phone to the router.

 

[LCIS]

Its not what im trying to do... but thanks!

LCIS TECH
LAND COMMUNICATION INFORMATION SYSTEM
DND

 

[jedi1337]

Im pretty sure you need a dial plan in there, something along the lines of Dial-peer voice 1 voip
destination-pattern .T
port (port to internet)

That and your missing direct inward dialing, your router doesnt know where to route calls

 

[whykap]

Take the splitter out of the FXO port and put it in your wall outlet BEFORE the FXO port. This is not a configuration issue, its a wiring issue.