Full Blown BCM

[RYLSFAN]

I have a 400 3.7 that we are getting ready to install. It is loaded with 6 MBM and 32 IP clients. This is by far one of the bigger BCM's that i have installed and i was wondering if someone could offer up some suggestions on processing speed and reliability. All thoughts and suggestions are appreciated.

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[acewarlock]

It depends on how many resources are being use at the same time and reliability shound be the same as a smaller system. (Your asking for what if)

 

[3Sixty]

I would suggest you becareful on what codecs you use and make sure if you are using G729 or G723 you have 4 MSPEC cards installed on your system.

http://www.nortelsupport.net

 

[RYLSFAN]

marshall can you tell me the steps to installing more PEC cards? I was told it's not easy. thanks.

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[3Sixty]

There is nothing to installing more MSPEC cards you open the box and you will see to slots that look like PCMCIA cards. Install your MSPEC cards and your job is done.

Marshall

http://www.nortelsupport.net

 

[RYLSFAN]

i understand that side of it, i was told adding these cards once it has been programmed cause instability. any truth to that?


Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[3Sixty]

It allocates more DSP resources to the system the system would be more stable especially in an IP enviroment. It is like adding ram to a PC it well run better with more resources.

Marshall

http://www.nortelsupport.net