Fujitsu PBX ISDN Trunk config

[TAAKC]

Hi! I'm working with a client that has desires to access the T1 "trunk" of their Fujitsu PBX for usage with a Video Conferencing Bridge. The bridge can use various "standard" setting for 4ESS, 5ESS, NI, Trunk, etc.

They successfully do that w/some Cisco gear for Remote Access; however Video is just a little different.

Has ANYBODY out there got any idea how to configure the Fujitsu for this??

 

[NewNic]

I do not, But Altura has the expertise to help you

 

[ksphoneman]

Use Command ASS ISST (Requires a PRI or BRI card and software IPREBS(DIS SOFT))
This allows you to create an ISDN extension that supports
5ESS for a BRI and 4ESS for a PRI. To esablish video is no different than a data call, and the PBX is trasparent to the call. To use BRI most video equipment require an inverse mux to bond the 2x64k calls together.