Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FTP -
- Thread starter 4kd
- Start date
Load INETCFG, Select TCPIP,
Make sure LAN STATIC ROUTING is ENABLED then select LAN STATIC ROUTING TABLE
Press Insert, Change Route TYpe to DEFAULT ROUTE, and then set the Default Gateway IP Address
Reinitialize the server and voulla. Or you may simply do a reset server and let the server reboot.
[sig]<p>Mark C. Greenwood, Certified N<br><a href=mailto:m_jgreenwood@yahoo.com>m_jgreenwood@yahoo.com</a><br><a href= > </a><br>CNE 4.11 and CNE 5 certified. BS Degree in MIS. Working in the industry for 8 years. <br>
I work with NT servers, NDS for NT as well.<br>
[/sig]
Make sure LAN STATIC ROUTING is ENABLED then select LAN STATIC ROUTING TABLE
Press Insert, Change Route TYpe to DEFAULT ROUTE, and then set the Default Gateway IP Address
Reinitialize the server and voulla. Or you may simply do a reset server and let the server reboot.
[sig]<p>Mark C. Greenwood, Certified N<br><a href=mailto:m_jgreenwood@yahoo.com>m_jgreenwood@yahoo.com</a><br><a href= > </a><br>CNE 4.11 and CNE 5 certified. BS Degree in MIS. Working in the industry for 8 years. <br>
I work with NT servers, NDS for NT as well.<br>
[/sig]
- Status
Similar threads
