FTP Uploads not working on ISA Server 2004 1

[GigaG]

I am trying to get the ability for my users to upload files to an FTP server. I have ISA server 2004 set up as their gateway address. I have also assigned a rule for allowing the proper Ports (20 and 21) from the internal network and to that specific FTP server. The condition is set for all users, and I have other rules and policies set for the same "All users" and they work fine. I have also made sure that the FTP access filter is enabled. i attempted to set a NATtransport registry entry that was suggested in a TechBullitin, but this did not work either.

The error I get is "Access Denied" whenever using a FTP program to access the site. i am able to log in fine and if I log in from another network, I can upload just fine... so it is not permissions. i have tried active and passive... neither seems to work... The odd thing is when I monitor the traffic, i see it use my FTP rule and it Initiates connection and Closes fine, but i keep getting the Access denied error on the client end...

Any help would be appreciated,


MCP ACA-I CTP

 

[josephdavis]

1. In ISA management; right-click on the FTP rule you created and select "Configure FTP"
2. There is a check box on the panel which opens named "read-only". Is this checked? If it is, remove the check, save and apply.

That should do it.

-Joe

 

[GigaG]

Ok... this was checked and I unchecked it and Applied the settings, but this did not fix the problem... it is doing the same thing... does it require a reboot?

MCP ACA-I CTP

 

[josephdavis]

It shouldn't require a reboot.

Try recreating the rule, taking care to make sure the FTP Filter is set to not be read only then apply the settings.

Also, take a look at this link

http://www.isaserver.org/pages/search.asp?query=FTP.

-Joe

http://joe.galactik.com

 

[GigaG]

Removing and recreating it worked like a charm... Thanks a bunch

MCP ACA-I CTP