Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FSC Definitions for StorageTek 9730
- Thread starter RussBrock
- Start date
&&332a
ERR_AUD_UNREADABLE_LABEL_FINAL,
Three retries were exausted trying in vain to read a cartridge label or a calibration target.
POSSIBLE CONFIGURATION PROBLEM - If the library is configured for less then 4 drives the optional two cell pack must be installed and locked down in the fourth drive slot.
If the cartridge is not labeled, this is not a true error.
If the customer uses unlabeled cartridges in their library this error will appear frequently.
If numerous locations are failing it could possibly be that the proimity sensor or camera are not working and the hand assembly should be switched.
FRU: LOCATION: CONFIDENCE %:
Non-Fatal Logical Err S/W CO 10
HAND ASSY LSM CO 45
Cartridge Label LSM CO 45
ERR_AUD_UNREADABLE_LABEL_FINAL,
Three retries were exausted trying in vain to read a cartridge label or a calibration target.
POSSIBLE CONFIGURATION PROBLEM - If the library is configured for less then 4 drives the optional two cell pack must be installed and locked down in the fourth drive slot.
If the cartridge is not labeled, this is not a true error.
If the customer uses unlabeled cartridges in their library this error will appear frequently.
If numerous locations are failing it could possibly be that the proimity sensor or camera are not working and the hand assembly should be switched.
FRU: LOCATION: CONFIDENCE %:
Non-Fatal Logical Err S/W CO 10
HAND ASSY LSM CO 45
Cartridge Label LSM CO 45
- Status
Similar threads
- Locked
- Question
- Locked
- Question