Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FROM Reading Failure displayed on a DT300

Status
Not open for further replies.

Chalky1

Programmer
Sep 27, 2012
19
AU
G’day all,

Have a curious problem on a DT300 I had discovered today.

The display reads ‘FROM Reading Failure.’
Would I be safe in assuming it is having a problem reading the Flash Memory the Firmware is stored on?

Would there be any solution to the problem?

Thanks in advance,

Chalky.
 
What system is it on?
You cannot re-flash the DT300's. Try swapping it with another phone to verify if it is the phone or the port. If it's the phone, replace it. If it's the port try resetting the card.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top