Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

From display part / user part

Status
Not open for further replies.
xs650

xs650

Technical User
Jul 29, 2010
521
DE
Hi,
I use a eMG80 (5.1.12) connected to another vendor PBX via SIP trunk.
I want to send different numbers in the sip invite in the from header user part and display part.

Example: I want to send 8300 in the From display part and 300 in the From user part.
300 is the station CLI.

Is this somehow possible and if yes how?

Thanks
 
Status
Not open for further replies.

Similar threads

Chinji
  • Locked
  • Question
How to Factory Reset from Boot iPECS 1080i
Replies
0
Views
207
Chinji
Chinji
OldAndKnackered
  • Locked
  • Question
Disconnected/logged out from web programming
Replies
2
Views
91
martinhodge
martinhodge
Agent0007
  • Locked
  • Question
Intercom with a Display for 2 way video call
Replies
2
Views
67
Agent0007
Agent0007
nightwolf91
  • Locked
  • Question
Page an extension in DND mode from an attendant phone on eMG100
Replies
1
Views
91
nightwolf91
nightwolf91
nightwolf91
  • Locked
  • Question
Firmware update with LIP-9071 IP display phone
Replies
3
Views
97
nightwolf91
nightwolf91

Part and Inventory Search

Sponsor

Back
Top