Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FRL's/NCOS

Status
Not open for further replies.

IrishBlue

Technical User
Joined
Feb 4, 2003
Messages
24
Location
US
Any advice would be greatly appreciated. I built 4 RLI's using TOD [time of day schedules]. This was designed to only allow certain phones to call specific area codes at specific times. Unfortunately, this is affecting the entire office. I used FRL 4 for each RLI. So if I make each Mgr's phone greater then FRL 4, then these restrictions will not apply to them. When I look at the Mgrs phones [do a TNB], it only lists their NCOS and TGAR. How do I increase their FRL to be greater then 5?

Thanks.
 
LD 87
REQ CHG
CUST 0
FEAT NCTL
NCOS X
FRL X
YOU MAY HAVE TO RETURN TO YOU GET TO NCOS AND FRL OLD ROLMEN WORKING ON NORTELS
 
Thanks Perry. This is great!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top