Frame Relay on a 256K Circuit

[secureinc]

I am needing to setup a Frame 256k point-to-point. I know how to setup the routers for a full T1, but what is the commands that must be entered for a 256k circuit? Also, what interface do these need to be configured on? Thank you.....

 

[IllegalOperation]

interface Serial0
bandwidth 256
service-module t1 timeslots 1-4

 

[routerman]

How about

Int s0
encap frame
band 1544

int s0.1 point-to-point
ip addr n.n.n.n 255.255.255.252
band 256
frame-relay interface-dlci nnn
traffic-shape rate 256000 64000 0
traffic-shape rate <cir-value>
traffic-shape rate fecn-adapt