Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Frame Relay circuit issue.

Status
Not open for further replies.

ssiva1086

ISP
Oct 7, 2008
2
US
Hi,

Can someone help me out on this issue?

We have FR circuit which is having some issue.It has been flapping for all most a month now.Everyday 5/6 times.

southafrica#show interfaces serial 0/1

Serial0/1 is up, line protocol is up
Hardware is PowerQUICC Serial
Description: ATT MIS ckt
MTU 1500 bytes, BW 512 Kbit, DLY 20000 usec,
reliability 255/255, txload 2/255, rxload 5/255
Encapsulation FRAME-RELAY IETF, loopback not set
Keepalive set (10 sec)
LMI enq sent 1461, LMI stat recvd 1458, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
Broadcast queue 0/64, broadcasts sent/dropped 252/0, interface broadcasts 0
Last input 00:00:04, output 00:00:00, output hang never
Last clearing of "show interface" counters 04:05:02
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
1 minute input rate 11000 bits/sec, 5 packets/sec
1 minute output rate 6000 bits/sec, 6 packets/sec
50001 packets input, 16438536 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
333 input errors, 83 CRC, 186 frame, 0 overrun, 0 ignored, 64 abort
39999 packets output, 10816245 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 output buffer failures, 0 output buffers swapped out
4 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top