frame problem

[jimberger]

Hi

i have two row frames.
the top frame contains a table that is positioned in the middle of the screen and has a width of 50%. in the second frame i want the table to continue. however in the second frame i have scrolling=yes and in the first frame i have scrolling=no. because of this the table's do no match up properly so it dosent look like one continous table. so it looks like the header of the table is slightly off centre. if i take scrolling off on the second frame the tables line up but i want scrolling on. any ideas?
thanks for your help
jim

 

[DaRNCaT]

perhaps if you fool about with the percentages, then you will be able to get them to match up.
50% is taking into account the size of the scroller, either add a spacer in the top frame to shove the content over the amount of space the scroller takes up, or adjust the top percentage from 50 to perhaps 51 or 52, until it matches up.

----------------------------------------
Sometimes, when my code just won't behave, I take it outside and make it listen to britney spears music, and when it comes back it's really well behaved. I wonder if it's suffering from post tramatic stress syndrome now..