fpw2.6 in W2003 and Citrix

[danielrodolfocastro]

I was needed migrate to a this environment, but the FOXPROW.EXE DOES NOT RESPOND ANYWAY!!! (also the .exe's create with fpw2.6...) What I need to configure to resolve this problem? I try to execute this exe's into Administrator privileges. BTW, from a PC over the red executing is ok?!?!?!. Help please...

 

[rob444]

There is a FAQ about Foxpro for Dos faq182-6380
In that FAQ you can find the patch for FPW 2.6 (DZPatch) that you have to apply to the runtime and to the IDE.

If this doesn't solve the problem let us know.

Rob.

 

[rob444]

Also have a look at:

http://www.tek-tips.com/viewthread.cfm?qid=1082517

A thread about running FPW on W2003 with Citrix

Rob.

 

[danielrodolfocastro]

I deal with all the ways mi mind can create... but the foxprow.exe does not respond... I'm very confused. In an w2003ES all run well, but with citrix aggregate wow!!! nothing run, both the programming environmente and the .exe's generates with it. Help me please with an different idea from the previous post... Thank's

 

[rob444]

If you run the taskmanager, and click on the exe to start it what do you see in the taskmanager?
Does the exe appear in the tastlist and dissappear shortly after that or doesn't it show up at all?

Rob.

 

[rob444]

Have a look at the following links, perhaps there are some good tips in it regarding to the Citrix problems...

http://fox.wikis.com/wc.dll?Wiki~CitrixHints

http://fox.wikis.com/wc.dll?Wiki~sys3050

Rob.