Found a HP9000 A Class 180c what is it?

[Spirit]

I won't be at all suprised if no one answers this but here goes.....

Long story short preparing for a Software audit and I came across a HP9000 A Class 180c with External DVD and tape drives. Never being afraid of the new (or old in this case).... want to find out if it is useful at all or what is on it?

Problem is I've found the "On" button at the back but thats IT! Eeek!

I presume I need a console cable or be able to remote access it via the network as there's no input device connectors (or out put for that matter) exactly like my Switches and firewalls.

I am looking for resources to help me get started. The HP website is falling down around my ears and my online searches get nothing but Refurbished equipment.

(Sorry if the above doesn't make sense!)

Thanks for any response even if its "Skip It!"

Iain

 

[Martin999]

Iain,

Hi there - an HP A Class certainly is useful, if nothing else it makes an ideal test box.

Its towards the bottom end of the range,probebly two drives, and prob. 1 processor (though would have to check).

There should be a serial connector on the back, into which there should be a lead that splits into three connecters, UPS, Console and Remote Console if I am correct. You should plug into the remote console. However, it sounds as if this lead is missing. You should wasily be able to obtain one from HP.

Hope this helps.

Martin

 

[Spirit]

Thanks Martin,

Sounds just about right to be honest.

I have started look for a console cable and will have a play on a quiet afternoon.

Thanks again,
Iain