forwarding on CCIS site a to b and then back to a's vms not working

[rotters]

Is it possible to forward from in CCIS as follows:

site A Site B

200 300

E600>200:3,00 E603>300:2,99 (pilot for voicemial)

Note> 299 is the voicemial.

If you call 300 - it goes to voicemial.
if you call internally from site a or if a trunk calls comes in from site and is forwarded to 300, it does not go to voicemail.

 

[MercuryComm]

I would check CMD 360>(incoming CCIS rt)(out CCIS going rt)> make it a 0 and any other combination of routes for both sites A and B. So if your CCIS route in Site A and B is 10 as an example you would for sure have to assign 360>1010>0 for CFD to work. You would also need to make sure both sites have the following: 08>370>1, 08>222>1, 08>386 and 387>1, and 42>72>07. Make sure site A has 08>373>0. Hope this helps.