Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Forwarding LDNs, but not ATDN

Status
Not open for further replies.

ubtech

MIS
Mar 18, 2004
2
US
We have two locations, one with an Option 61C and one Option 11, linked via a TIE line. We have attendant consoles in both locations. We want to be able to forward the LDNs from one location to the other without forwarding calls to the ATDN.

Any help would be appreciated. Thanks!
 
I`m not quite sure what you mean, but it might be that you could use the NAS-feature in this case. And as you know, working with telephony solutions, there are no problems, just challenges.
 
Hi,

It is"not" possible to forward a LDN other DN then the ATDN (Unless you disconnect the 2250 and use the NIT data).

What you could do is the following:

1 Remove LDN from LDN data block
2 Create a phantom that DCFW's to the number you want




Marc D.

If Bill Gates had a nickel for every time Windows crashed... Oh wait, he does...
 
Be carrefull with removing all LDNs! The length of your internal numberplan depents on it!!! So maybe if you remove your LDN you can't recieve any DID call!!

This is because your M1 doesn't know witch digits are the DN of the telsets..

Goodluck..
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top