Forwarding from an analog phone 3

[steeltech]

One of my users is getting moved to a new office and would like to have his extension forwarded to his cell phone while construction is finished. He was using an old analog phone. Is it possible to have his calls forwarded to his cell?

I know with the digital phones you have an option on the phone itself but was wondering if its possible to do this for analog phones through the PBX.

 

[PERRYPJ]

YES, I BELIEVE THE CODE IS #1 THEN THE NUMBER. YOU MAY HAVE TO PUT CFXA IN THE CLS

OLD ROLMEN WORKING ON NORTELS

 

[steeltech]

I don't know much about how this works but you can explain what you mean by "the code is #1".

I'm assuming I will have to program this. Can you show me a step by step of how this will work?

 

[cmawbey]

you will need to check the how many digits is set to call fwd

ld 20
req prt
type tnb
cust x
tn x x x x

look at the cfw prompt it needs to be set at least to 11
and as mentioned cfxa in the cls

 

[bigindian65]

once you have CLS set with CFXA, HTA, FNA

Take the analog set off hook - so you have dialtone

Hit # 1 on keypad

enter number you want to forward to

hangup



Mato' Was'aka

 

[tnphoneman]

In ld 57 print your flexible feature codes. The default for call forward is #1. The set need to be programmed for CFXA in the CLS and under FTR you need to have CFW 12 or however many digits they need to dial.

To activate the feature from the set Dial #1 plus the number as you would dial it for example #195551212

 

[acewarlock]

Prt the TNB of that phone and post here.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[steeltech]

Here is the PRT of the TNB:


DES MAINT
TN 003 0 00 12
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 5231 0 MARP
CPND
NAME Steve Rxxxxxxxx
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 7899
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 99
LNRS 16
XLST
SCI 0
CLS CTD DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRD AGRD CWD SWD PUA MWA RMMD SMWD LPD XHD SLKD CCSD LNA TVD
CFTD SFA MRD C6D CNID CLBD AUTU
ICDA CDMD LLCN EHTD MCTD
GPUA DPUA CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD
USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC CDMR
RCO 0
PLEV 02
CSDN
AACS NO
MLWU_LANG 0
FTR CFW 4
FTR PHD
FTR FDN 7899
DATE 25 MAR 2005

 

[acewarlock]

CLS CTD DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRD AGRD CWD SWD PUA MWA RMMD SMWD LPD XHD SLKD CCSD LNA TVD
CFTD SFA MRD C6D CNID CLBD AUTU
ICDA CDMD LLCN EHTD MCTD
GPUA DPUA CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD
USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC CDMR
RCO 0
PLEV 02
CSDN
AACS NO
MLWU_LANG 0
FTR CFW 4
------------------------------------------------------
REQ CHG
TYPE 500
ECHG YES
CLS CFXA
FTR CFW 11

you need to know what your SRPE Code is and it nornally is 1 so do a DNB 1 to see if it is.

then do as PERRYPJ said to do with #1 the number xxx xxx xxxx




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[steeltech]

After the ECHG it says ITEM. Not sure what to type and I hit ENTER, this came out:

MEM AVAIL: (U/P): 814084 USED U P: 225206 91205 TOT: 1130495
DISK RECS AVAIL: 640
ANALOGUE TELEPHONES AVAIL: 25 USED: 71 TOT: 96
CLASS TELEPHONES AVAIL: 0 USED: 0 TOT: 0
WIRELESS TELEPHONES AVAIL: 0 USED: 0 TOT: 0
WIRELESS VISITORS AVAIL: 0 USED: 0 TOT: 0
ACD AGENTS AVAIL: 16 USED: 4 TOT: 20
AST AVAIL: 1 USED: 0 TOT: 1
TNS AVAIL: 2242 USED: 258 TOT: 2500
DATA PORTS AVAIL: 2500 USED: 0 TOT: 2500
PHANTOM PORTS AVAIL: 2446 USED: 54 TOT: 2500


Do I need to put something in for ITEM?

 

[bigindian65]

ITEM: is your prompt to make a chg

ITEM: CLS CFXA FNA HTA

ITEM: FTR
FTR CFW 12 9,XXXXXXXXX



Mato' Was'aka

 

[steeltech]

Ok I typed out:

ITEM CLS CFXA

ITEM FTR CFW 11

When I do a PRT now it reads out:
CLS CTD DTN FBD XFA WTA THFD FNA HTA ONS
LPR XRD AGRD CWD SWD PUA MWA RMMD SMWD LPD XHD SLKD CCSD LNA TVD
CFTD SFA MRD C6D CNID CLBD AUTU
ICDA CDMD LLCN EHTD MCTD
GPUA DPUA CFXA ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD
USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC CDMR
RCO 0
PLEV 02
CSDN
AACS NO
MLWU_LANG 0
FTR CFW 11
FTR PHD
FTR FDN 7899
DATE 4 FEB 2008



I noticed that CFXA and FTR CFW 11 was added.

 

[steeltech]

Hitting 1 does not seem to work.

How do I get my SRPE code? Acewarlock said to do a DNB 1 but I didn't see anything.



REQ: prt
TYPE: dnb
CUST
DN 1
DATE
PAGE
DES

CUST 00


DN 1
TYPE SFP

 

[bigindian65]

ld 21
prt
ftr_data
cust 0



Mato' Was'aka

 

[Nortellian]

1 is your spree.

put a butt sett on the analog line and go off hook. Press #1 than dial the number you want the line forwarded (don't forget to enter 9 or whatever you use to grab an outside line) wait 2 seconds and hang up. Call the analog line and see if it is forwarded. if not try this procedure again. For some reason it seems like it make takea me two times for it two work.

 

[steeltech]

It shows:
SPRE 1


So it is 1.

Here we have to dial 9 to access an outside line. So do I have to hit 1 and 9 xxx xxx xxx? Will have I have to change the CFW to 12?

 

[steeltech]

I pick up the handset and 1...

-then I've tried hitting 9 and 1 909 xxx xxxx but before I can finish I just get a disconnected tone

-then I hit 9 and dial number without 1 and area code but still get disconnected tone before I can finish.

 

[bigindian65]

pound (#) 1



Mato' Was'aka

 

[Nortellian]

# equals pound sign not number so hit # in the instructions above

 

[tnphoneman]

Dial like this

#191907343XXXX