hi could anyone help with a small issue that im having on the opt11 , i need to create 2 new routes to a trunk (RBD) to a off site client that has a contact portal , i have looked in ld 49 and dont see the previous did/ddi pointing to the rout that has been created.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
forwarding did/ddi to a trunk rout
- Thread starter Arlosym
- Start date
acewarlock
Technical User
You don't make routes to a trunk, you make trunks to a route. Why are you looking in LD 49?
Trunks are programmed in LD 14
Route are programmed in LD 16
You print Trunks in LD 20
You print Routes in LD 21
Maybe if you tell us what and how you make that call now and what is it you really want to do we might be able to help.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
Trunks are programmed in LD 14
Route are programmed in LD 16
You print Trunks in LD 20
You print Routes in LD 21
Maybe if you tell us what and how you make that call now and what is it you really want to do we might be able to help.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
