Forwarding a MARP'd extension

[TelecAdmin]

We have a remote site that has its main number on all 5 of the users' phones so anyone can answer. We would like to have this number which doesn't have a Key 0 on a physical phone of its own (we would like to avoid putting in a standalone for it) be MARP'd on the manager's phone and him be able to forward this main number and it work even though this number is on the other employees' phones. In my testing here,I have found that with the number as Key 2 MARP'd on my 3903 and LHK remaining 1 on my desk phone, this works well and forwarding my number only to my cell, this number will ring to my cell too. When I add this number to another 3903 however, both phones ring when this number is dialed and forwarding no longer happens. Where the phone is MARP'd may not be important as long as the number can be forwarded as needed,of course. I searched the forums for similar situations here on the site but none seem to fit this particular need. Thanks everyone in advance!

 

[djwht]

call redirection follows the marp phone if marp is turned on. otherwise it follows the tn that was last modified

 

[acewarlock]

On my phone at the last place I worked, I had five phone that had all my ext's on them. all the Ext's where MARPed on my main phone and when I forwarded my phone all the numbers forwarded even if they where key 0 on the other phones. each phone had a different Key 0, but all ext's appeared on all phones.

 

[BillCorv]

MARP is used for forward no answer and hunt on multiple appearance DNs. The MARPed DN will follow the FDN and HUNT prompts on the phone.
Manual Call Forward using the Call Forward key does not look at MARP. The DN to be placed on Manual Call Forward must appear on Key 0 or be a single appearance on the phone.