forward with authcodes

[jftg73]

I HAVE AN OP. 61C , I WISH FORWARD AN EXT. TO PHONE CELLULAR BUT I CAN´T DO IT.

I HAVE

CWF 23
KEY 12 CFW 23 451234590445512345678, NCOS 1 RESTRICTION TO CELLULAR BUT ENABLE WITH AUTH CODE.

4512345=AUTH CODE
9=OUTGOING TO CO
0445512345678=CELLULAR

IF I ENTRY THIS NUMBER IN KEY 12 CFW I GET BUSY, BUT IF I CHANGE THE EXT. TO NCOS 2 (OUTGOING TO CELLULAR WITHOUT AUTH CODE)I GET CONNECTION, ANYBODY CAN ASSIST ME?

CFW 12 CFW 23 90445512345678 I GET CONNECTION, WITH MY NCOS 2.

THANKS.

 

[PERRYPJ]

NEVER TRIED TO FORWARD USING AUTHCODES BUT I WOULD SAY OF THE TOP IT WON'T WORK. FORWARDING OFFSITE IS A LITTLE STRANGE

OLD ROLMEN WORKING ON NORTELS

 

[iptuser]

I`ve used it in Europe but had issues in the US. One of the things you need is a pause between the Auth and Dialled number,there is a pause patch but i`ve forgotten , I try to allocate.

wayne

 

[Utreg]

The pause is needed as wayne states, sometimes a * is used for this.

But a forward including auth code looks unsafe to me: if the set has a display anyone can rip the auth code...
I use phantoms to implement this: the user just forwards to the phantom which defaults to the (fixed) cellular number.

 

[iptuser]

Auth, don`t appear on the display or at least tey don`t when you dial out normal using Auth. codes. Why don`t you use TOD barring calls to cell phone are ok between business hours but barred all otehr times or use FRL so that only users which are allowed access to cell phones can forward- though you will need to update the SPN alot.

wayne

 

[iptuser]

jftg73,


In the info. above I could not see any AUTH. featyre code config.on the callforward digits, you need this i.e AUTH #

#451234590445512345678

wayne