Forward Ext. to an outside line

[slloyd82]

I want to have all incoming calls to a particular extension to be forwarded to an outside line. The outside line would be a cell phone. I know feature 4 lets you forward inside the office, but I can't figure out how to get outside the office.

Thanks,
Scott Lloyd

 

[curlycord]

What is system type and version software?

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[slloyd82]

Norstar Nortel.

 

[slloyd82]

Did i give the wrong info?

 

[curlycord]

Nortel - Manufacturer
Norstar - System platform

Looking to see if MICS (0X32), CICS, 8X24, 6X16, 3X8 etc and also software level.

If you have access to config programming get the SP number from maintenance.



=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[curlycord]

Any of these look familiar?

http://www.advanced-phones.com/nortel_n_sys.html

Get the software NT code off the software card inside.




=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[slloyd82]

SP: 30BwE02 NAT

 

[slloyd82]

Nortel Modular 8x24 System

and

Nortel Modular ICS Key Service Unit NT7B53FA-93

look familiar. I don't have access to the units at right at this moment. There is a meeting going on in the room I need to get to.

 

[curlycord]

Model = MICS
Software = 6.0

You need to build a route under Services and give it a dest code say 8.
Then you can forward to 8 plus cell #


=----(((((((((()----=
curlycord

http://www.curlycord.com