forward all ddi number

[forcetranquille]

Hi all,

how can i forward all ddi lines on a message or a number ?
CS1000T - CS1000E

Tks

French Technical Engineer

 

[johnpoole]

i would use the idc table in 49// new idc, then go to the ddi route and enter that table number for both day and night tables..

by doing that the switch sees the output side of the idc as the dial dn

john poole
bellsouth business
columbia,sc

 

[forcetranquille]

thank Johnpoole, but i must program all the ddi number in the idc table... It will be very long...

French Technical Engineer

 

[acewarlock]

What is it you want to do, I didn't understand the original question?

"how can i forward all ddi lines on a message or a number ?"

What does this mean?

 

[johnpoole]

yes, try just the 1st digit.. or groups of 10

john poole
bellsouth business
columbia,sc

 

[kirchenlo]

Tell me what you would like to do with this forward? Tell what you would like to do with htis function.

The only way for DDI is via IDC Tables.

 

[forcetranquille]

it was in a case of emergency.
i wanted to forward all ddi number on a message to say that the site is not available



French Technical Engineer

 

[johnpoole]

do you have a 2250? are you using nights? build an idc that does the translation and just apply it to night idc

john poole
bellsouth business
columbia,sc