Formating and printing W2's

[TriBaby]

I am having trouble formating my W2's in Mas90. I have this issue every year. I have purchased the forms from the recommended vendor. Laser W'2 2 per form.

I was able to move the left margin over but my font is still too small and the top margin is much too high.

I do not know if this may be a function of not having all the IRD's from the past installed properly or if I just do not know how to properly format these W-2's. I hope I do not have to go into the detail of the report and completely reformat the report line by line! Any suggestions or help would be greatly appreciated. Thanks

 

[adamroof]

The font is probably because print compressed has been selected on the header of the forms tab. This is also where the top margin in set. If individual lines are not lining up properly, then the detail tab on the forms page must be adjusted as well for the lines that are not lining up properly. It takes a bit of time to get everything lined up properly, but once it's done it will not have to be changed unless the Feds change the form which hasn't been done for a number of years.