osiflygirl
IS-IT--Management
I want to push a new IOS onto a 3524. I formated the flash and now cannot get a response from the switch. Does anyone know how to push a brand new IOS onto the switch?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
formated 3524 flash memory - HELP
- Thread starter osiflygirl
- Start date
- Status
You will probably have to boot to RMON and perform an xmodem upload. I've never done it with a catalyst but the 3524 should be similar since it uses IOS.
See
-Jeff
----------------------------------------
Wassabi Pop Tarts! Write Kellogs today!
See
-Jeff
----------------------------------------
Wassabi Pop Tarts! Write Kellogs today!
- Thread starter
- #3
osiflygirl
IS-IT--Management
thanks alot, that is what I figured out to do...now I would like to wipe the config and start fresh...would tftp'ing a new image facilitate this or do I need to use 'no' statements in front of everything?
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Question