Forcing spesific numbers through specific loop

[atverre]

I'm trying to find out how to force specific numbers to use a specific loop. Anyone who can tell me how to program this?

 

[one234]

Hi,

You cannot, as far as I know, force specific numbers over a specific loop.

You can force specific numbers over a specific route.

You define the Route in LD 86 in the route list block (RLB) you assign the RLB's to the SPN/LOC/CDP/whatever in LD 87 and LD 90

Marc D.

 

[coniglio]

one234, can't atilla88 create a new route with the loop s/he wants and then put that route in a new RLI and have that # go over that route?

 

[one234]

S/He can do that. That's an indirect method to "force" specific numbers over a specific loop. You cannot force a number over a loop... Only over a specific route and if that route only applies to that loop your done...

Marc D.

 

[atverre]

I've define the Route in LD 86 in the route list block.

RLI 7
ENTR 0
LTER NO
ROUT 4
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 0
DMI 1
FCI 0
FSNI 0
BNE NO
SBOC NRR
IDBB DBA
IOHQ NO
OHQ NO
CBQ NO

ENTR 1
LTER NO
ROUT 4
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 0
DMI 0
FCI 0
FSNI 0
BNE NO
SBOC NRR
IDBB DBD
IOHQ NO
OHQ NO
CBQ NO

ISET 0
NALT 5
MFRL 0
OVLL 1

Then what? I can't fully understand how to link this route to a specific number