Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
force use of specific port for rsh
- Thread starter Barn
- Start date
- Thread starter
- #3
The probleme is that I have 2 nodes on different subnetworks. The network administrator did allowed the rsh command so can do from node A to node B:
#rsh nodeB
but I can't do :
#rsh nodeB ls
The system hangs a while then give me the prompt back without error.
When the network administrator opens all the ports on the firewall every think is ok but you cannot call it a firewall anymore.
Is there an other port to open so that command:
# rsh nodeB ls
could work?
Thanks in advance.
Barn.
IBM Certified -- Am I?
#rsh nodeB
but I can't do :
#rsh nodeB ls
The system hangs a while then give me the prompt back without error.
When the network administrator opens all the ports on the firewall every think is ok but you cannot call it a firewall anymore.
Is there an other port to open so that command:
# rsh nodeB ls
could work?
Thanks in advance.
Barn.
IBM Certified -- Am I?
- Status
Similar threads
- Locked
- Question