Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

For any one looking for Information

Status
Not open for further replies.

NMBates

Technical User
Jan 21, 2022
1
US
For any one looking for Information on "How to Setup Email Notification On Ericsson LG iPECS EMG80 / EMG 100 PBXs"? Here are some notes on how I was able to set it up within each Individual Station on the EMG 100. Once I enter the information below, the PBX was able to send a test email to me.

(2022-01-21)
How to setup Email Notification on iPECS EMG100
Once Logged into the iPECs GUI: (Example: )
Setting Indiviual Extensions VM Email Notification setting
- Go to Station Data -> Station VM Attributes (127) -> Enter Station Range
- Scroll to the bottom section - E-Mail Notification
- Turn on E-Mail Notification: (ON) {Default: ON}
- SMTP Server Address (IP or Domain Name): _________________________­_________
(Example: smtp.gmail.com )
- SMTP Port: _______________ (Example: 587 )
- SMTP Security Connection Options: _________________________________________
<No Security Connection, SSL, TLS>(Example: TLS )
- E-Mail Account ID: ________________________________________________________
(Example: <EnterYourEmailAddress>@gmail.com)
- E-Mail Account Password: __________________________________________________
(Example: <EnterYourEmailPassword> )
- Sender E-Mail Address (From): _______________________________________________
(Example: <EnterYourEmailAddress>@gmail.com )
- Receiver E-Mail Address: _______________________________________________
(Example: <EnterYourEmailAddress>@gmail.com )
- Attach Message Option: ON <Options: On, Off> {Default: ON }
- Delete Message Option: ON <Options: On, Off> {Default: OFF}
Check VM COS
- Go to System Data -> VM COS Attributes (253)
- Line 5: E-Mail Notification -> Options <Disable, Notification Only, Notification and Delete> {Default: Notification and Delete }

Hope this id helpful to some one out there.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top