FOIP - Audio code -

[dickinsonsfan]

Hello everybody...
I work on a company and i have a big problem here, please if somebody can have a idea to help me....
The problem is, i install the audio code here, but i can't send fax using external link, when a use only internal the (DN) the fax is working normaly, but when i use (number)(DN)i listen the sound of the fax, when i press start the cax connect and start to send, and stop in the middle of the process and give the COD 43.

 

[pronei]

1. Are you using a Nortel approved firmware for the Audio Codes?

2. What port on the Audio codes are you using for the Fax?

3. Paste your board.ini (Audio Codes config) file.

 

[dickinsonsfan]

Hi everybody...
First thanks for help.
That is my first instalation of this thing...
So...
1- Yes i`m using a Audio code that Nortel approved.
2- The Audio Code that i use here is the MP-112 FXS
3- How can i make this (board.ini) to give the Audio Code config? Whats is the config that you need?

Here is the release 5.0, Thanks and i waiting for the answer.
Rodrigo Ribeiro Oblesrczuk.

 

[dickinsonsfan]

I take the board.ini and i change the extension to .txt to read the file, what's the config you want, because the file is huge...
Thanks...
Rodrigo Ribeiro Oblesrczuk.

 

[dickinsonsfan]

Hi everybody
I make the Board.ini. and change the file to .txt, what's the params that you want me to put here the file is large...
Thanks...
Rodrigo Ribeiro Oblesrczuk.