Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

(FOC012) THE WORD 'FILE' OR THE FILENAME APPEARS TWICE

Status
Not open for further replies.

jsmith22

Programmer
Mar 5, 2013
1
US
I keep getting the following error:

0 ERROR AT OR NEAR LINE 49 IN PROCEDURE lbinsface2
(FOC012) THE WORD 'FILE' OR THE FILENAME APPEARS TWICE
BYPASSING TO END OF COMMAND

Below is my FEX code:

-SET &TIME=HCNVRT(HGETC(8,'HYYMDm'),'(HMDYYSA)',21,'A21');
DEFINE FILE PRC_INSURANCE_FACE_SHEET
ORDER/A20V=
IF PRC_INSURANCE_FACE_SHEET.ANSWERSET1.LEVEL_NO EQ '1' THEN 'Primary Insurance' ELSE
IF PRC_INSURANCE_FACE_SHEET.ANSWERSET1.LEVEL_NO EQ '2' THEN 'Secondary Insurance' ELSE
IF PRC_INSURANCE_FACE_SHEET.ANSWERSET1.LEVEL_NO EQ '3' THEN 'Tertiary Insurance' ELSE
IF PRC_INSURANCE_FACE_SHEET.ANSWERSET1.LEVEL_NO EQ '4' THEN 'Quaternary Insurance';
DOBCAST/HMDYY=PRC_INSURANCE_FACE_SHEET.ANSWERSET1.BIRTH_DATE;
STARTDATECAST/HMDYY=PRC_INSURANCE_FACE_SHEET.ANSWERSET1.DATE_DIALYSIS_BEGAN;
EFFECTIVEDATECAST/HMDYY=PRC_INSURANCE_FACE_SHEET.ANSWERSET1.COV_EFF_DATE;
EXPDATECAST/HMDYY=PRC_INSURANCE_FACE_SHEET.ANSWERSET1.COV_EXP_DATE;
PHONEFORMAT/A14=EDIT(PRC_INSURANCE_FACE_SHEET.ANSWERSET1.TELEPHONE, '(999) 999-9999');
SSFORMAT/A11=EDIT(PRC_INSURANCE_FACE_SHEET.ANSWERSET1.SOCIAL_SECURITY, '999-99-9999');
END
TABLE FILE PRC_INSURANCE_FACE_SHEET
BY 'PRC_INSURANCE_FACE_SHEET.ANSWERSET1.LEVEL_NO' NOPRINT AS ''

ON PRC_INSURANCE_FACE_SHEET.ANSWERSET1.LEVEL_NO SUBHEAD
"<PRC_INSURANCE_FACE_SHEET.ANSWERSET1.ORDER "
" "
"Plan Name: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.PLAN_NAME Certification: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.CERTIFICATION_NUMBER Effective Date: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.EFFECTIVEDATECAST"
"Address: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.CARRIER_ADDRESS_1 Group Number: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.GROUP_NUMBER Ending Date: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.EXPDATECAST"
" <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.CARRIER_ADDRESS_2"
" <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.CARRIER_CITY<PRC_INSURANCE_FACE_SHEET.ANSWERSET1.CARRIER_STATE<PRC_INSURANCE_FACE_SHEET.ANSWERSET1.CARRIER_ZIP_CODE <+0> "
"Insured's Name: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.SUBSCRIBER_NAME Insured's Relation: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.SUBSCRIBER_RELATION_DESC"
"Insured's Address: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.SUBSCRIBER_ADDRESS_1"
" <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.SUBSCRIBER_ADDRESS_2 <+0> <+0> <+0> "
" <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.SUBSCRIBER_CITY<PRC_INSURANCE_FACE_SHEET.ANSWERSET1.SUBSCRIBER_STATE<PRC_INSURANCE_FACE_SHEET.ANSWERSET1.SUBSCRIBER_ZIP_CODE <+0> "
" <+0> "
ON TABLE SUBHEAD
"Insurance Face Sheet<+0> <+0>DCI Laboratory Division"
" <+0>Printed<+0>&TIME"
HEADING
" "
"Demographics<+0> "
" "
"Patient Name: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.PATIENT_NAME Sex: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.SEX Race: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.RACE"
"Address: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.ADDRESS Marital Status: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.MARITAL_STATUS"
" <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.ADDRESS_2 <+0> "
"City: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.CITY State: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.STATE Zip: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.ZIP_CODE DOB: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.DOBCAST"
"Phone: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.PHONEFORMAT Social Security #: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.SSFORMAT Patient ID: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.PATIENT_ID"
"Primary Nephrologist: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.PHYSICIAN_NAME NPI: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.NPI"
"Primary Diagnosis: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.PRIMARY_CAUSE_ESRD<PRC_INSURANCE_FACE_SHEET.ANSWERSET1.NARRATIVE"
"First Dialysis Date: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.STARTDATECAST"
"Patient Type: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.PATIENT_TYPE Method: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.TREATMENT_METHOD Status: <PRC_INSURANCE_FACE_SHEET.ANSWERSET1.PATIENT_STATUS"
" <+0> "
FOOTING
"LBINSFACE"
IF PRC_INSURANCE_FACE_SHEET.INPUT.@PATIENT_ID EQ &@PATIENT_ID
ON TABLE SET PAGE-NUM OFF
ON TABLE NOTOTAL
ON TABLE PCHOLD FORMAT PDF
ON TABLE SET HTMLCSS ON
ON TABLE SET STYLE *
UNITS=IN,
PAGESIZE='Letter',
SQUEEZE=ON,
ORIENTATION=PORTRAIT,
$

...

ENDSTYLE
END

The issue seems to be related to the @PATIENT_ID variable. This is how my launch page passes it:

<![CDATA[TABLE FILE prc_insurance_face_sheet
SUM FST.PRC_INSURANCE_FACE_SHEET.INPUT.@PATIENT_ID
BY PRC_INSURANCE_FACE_SHEET.INPUT.@PATIENT_ID
-*insert_filters_here
ON TABLE PCHOLD FORMAT XML
END
]]>

Any help would be greatly appreciated! Thank you
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top