FNE features on v8

[IPOfficeIreland]

hi guys
didn't realise that One-X mobile doesn't work on v8, only on v4-7. Is this correct? I have a site where users want to dial into ISDN gateway (mobile sim cards connected to ISDN port) and get dial tone so they can dial back out on sip, etc. Is there a workaround or do I have this completely wrong?

cheers
Dave

 

[tlpeter]

It should work under release 8.0 fine.
But you can create an incoming callroute from the GSMbox to the IPO and get dialtone.


BAZINGA!

I'm not insane, my mother had me tested!

 

[IPOfficeIreland]

umm, seems to be a bug.
i have an icr which picks up the cli and should route to FNE shortcode 00. but instead it always follows the default ALL Voice route to main group. v8.0.44

 

[tlpeter]

You could try 8.0.46, it has a sh%t load of bug fixes.


BAZINGA!

I'm not insane, my mother had me tested!

 

[IPOfficeIreland]

just downloaded to 8.043 same thing. i find that if i modify a ddi which the call isn't coming in on I can get it to forward to FNE. very odd!
next problem - calls through the gsm unit are not sending out the correct dialled number, aaaahhhhhhhhh what a pain in the bxlx