Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fluke OTDR with non Fluke test cables

Status
Not open for further replies.

Zed1024

Vendor
Oct 16, 2018
1
DE
Hi Guys,

have you ever used Fluke OTDR Tester with testing leads that were not original from FLuke?

Testing kit is as follows:

FIONEX CABLE
500m 9/125μm G.657.A1 BendBright
Side A: SC/UPC, Side B: LC/UPC (This cable is usually delivered with FIONEX OTDR tester)

Now, if we start using this FIONEX Cable and start testing with FLUKE OTDR tester, what will happen?

I appreciate your help!
 
It should not be an issue.

As long as the launch and tail-end test cables are of the proper design for the system being tested (i.e. Single Mode, Multi-Mode), and the OTDR is calibrated with the cables to be used for the test, you should not see any issues.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top