Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Floppy problems installing Unixware 7.1.1

Status
Not open for further replies.
bergher

bergher

Vendor
Oct 26, 2002
4
EC
Boot disk runs OK, but disk #2 fails to read (incorrect disk inserted, failed to mount disk), altough the disks are ok (previously tested in older system). Also if installing from CD, Unixware doesn´t recognize HBA diskette (to activate DPT SmartRAID) error: (disk inserted is not HBA type), again, the disk is ok because i tested it in other pc.

My system is: INTEL Server board SC7500SW2/XEON 2.0Ghz/1 Gbyte RAM.

Please give me a hand
 
Status
Not open for further replies.

Similar threads

systemsadmin3000
  • Locked
  • Question
SCO Unixware 7.1.1 Installation Files
Replies
0
Views
76
systemsadmin3000
systemsadmin3000
penguinroundup
  • Locked
  • Question
password synchronization (SSOD) problems
Replies
0
Views
97
penguinroundup
penguinroundup
TebzaMajita
  • Locked
  • Question
Problems creating Emergency Boot Disk on Unixware 7.1.1
Replies
0
Views
40
TebzaMajita
TebzaMajita
TebzaMajita
  • Locked
  • Question
SCO Unixware 7.1.1 boot problem
Replies
3
Views
76
PHV
PHV
lorel
  • Locked
  • Question
Problems with "expect" script
Replies
3
Views
121
patw
patw

Part and Inventory Search

Sponsor

Back
Top