Floppy Drive designator on CP II based CS1000M

[ccarmock]

Hi I need to FTP a keycode file to a CS1000M system that is based on CP II processors with floppy drives.

I have totally forgotten the designator for the floppy drive, as it was years since I worked on a floppy based system. I am far more used to /rmd for the later series machines.


Can anyone remind me please?

 

[KCFLHRC]

Should be F0 or F1 depending on what CPU is active

 

[KCFLHRC]

You can find this information under LD 143 in the NTP's

 

[Firebird Scrambler]

It's a little tricky, but the easiest way I know is to copy the file onto the hard disk such as /u/db etc and then access "pdt" afterwards to copy it across onto the floppy drive by using e.g.
cd f0
ll
cp /u/db/keycode.rec .
ll

It's been a while since I last did it via remote access, but I think the above commands should be some help?.


All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.