Hi All:
I've recently been asked to enable caller ID blocking (*67) on our PBX, which I've done in LD 57. I configured FFC code Calling Party Privacy with *67 and this works fine. However, I discovered that if I simply enter 67 from my phone, then 9+phone number, this also works the same as entering *67. I had never tried dialing 67 then 9+phone number before, so I'm not sure if this is a system default or something I've done. If I try to out this feature code, I can out *67 OK, but if I out 67 from CPP, I don't get any error codes so it appears to be removed, but I can still use 67 for CPP on our phones. What's going on here?
Thanks,
Marty
I've recently been asked to enable caller ID blocking (*67) on our PBX, which I've done in LD 57. I configured FFC code Calling Party Privacy with *67 and this works fine. However, I discovered that if I simply enter 67 from my phone, then 9+phone number, this also works the same as entering *67. I had never tried dialing 67 then 9+phone number before, so I'm not sure if this is a system default or something I've done. If I try to out this feature code, I can out *67 OK, but if I out 67 from CPP, I don't get any error codes so it appears to be removed, but I can still use 67 for CPP on our phones. What's going on here?
Thanks,
Marty