Unhygienix
Technical User
I am very new at this so I apologize in advance. I am trying to load an IOS on my 2514. When I initialize the transfer using tftp it asks me what partition I want to flash. I choose one and the transfer starts normally but fails. I am assuming because the image is larger than the partition. My question is can I combine the two flash partitions to make on larger one. Here is the system info:
-------------------------------------
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 6144 Kbytes of main memory
No usable interfaces
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 6144 Kbytes of main memory
-------------------------------
And More:
-------------------------------
Cisco Internetwork Operating System Software
IOS (tm) 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWAR
E (fc1)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Tue 24-Oct-95 15:46 by mkamson
Image text-base: 0x01020000, data-base: 0x00001000
cisco 2500 (68030) processor (revision L) with 6140K/2048K bytes of memory.
Processor board serial number 01717482 with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
2 Ethernet/IEEE 802.3 interfaces.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash partition 1 (Read/Write)
4096K bytes of processor board System flash partition 2 (Read/Write
--------------------------
The image i am trying to load is roughly 5.5megs
Thanks for any help,
Andrew
-------------------------------------
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 6144 Kbytes of main memory
No usable interfaces
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 6144 Kbytes of main memory
-------------------------------
And More:
-------------------------------
Cisco Internetwork Operating System Software
IOS (tm) 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWAR
E (fc1)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Tue 24-Oct-95 15:46 by mkamson
Image text-base: 0x01020000, data-base: 0x00001000
cisco 2500 (68030) processor (revision L) with 6140K/2048K bytes of memory.
Processor board serial number 01717482 with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
2 Ethernet/IEEE 802.3 interfaces.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
4096K bytes of processor board System flash partition 1 (Read/Write)
4096K bytes of processor board System flash partition 2 (Read/Write
--------------------------
The image i am trying to load is roughly 5.5megs
Thanks for any help,
Andrew