flash2 on cics programing

[martin3]

Is there a way to remotly program the recording ext. on a flash2. Have programed Amanda voice mails over the phone and this easy to do was wondering if possible on flash.

 

[norstargirl]

You must be on site to do and recordings on the flash - If you have remote ulilities you can program the flash but not the greetings.

Hope this helps
norstargirl M.Parnell
(norstargirl)

 

[executone]

I had this wrote down in my notes.
Dialing in to change AA Greeting
Remote administration must be done through the Sys Coordinator mailbox (102). You'll have to initialize the mailbox before you can do remote stuff. Do the F981, 1020000, ok. Choose a new password etc. Keep in mind that when you change the password, it changes the password for F983 also. After you have initialized the mailbox, call into the system, when you hear the greeting dial * *. Enter the mailbox number and password then #. Press 9 9 to get into the remote administration menu. Listen to the prompts to change various settings.
To open or close the business press 1
To change a Company greeting, press 2...

Good Luck!!

 

[pjolly]

Note: You can only record greetings, not the AA prompts. Many systems are set up with greetings only, but be sure to check what is recorded before making changes. (More often than not, the prompt is the part that says "If you know your party's extension, enter it now...&quot