Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flash Voicemail Installation.

Status
Not open for further replies.

flyer777

Technical User
Feb 22, 2011
10
US
Help
I purchased a used Nostar Flash Voice mail 2 port that will be installed with a 824. The instruction manual calls for a "teladapt cord". I can't find any information on what it is or where to obtain one. Is it a standard 4 conductor telephone cord that connects to the ports?
Thanks.
 
Yes at least 2 pins. One port will give you 2 channels B1 & B2= 2 calls.

The flash comes with 2 jacks but the bottom one will not be activated unless you put in the expansion card.
 
Ironhorse,
Thank you very much for your help!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top