flash question

[ryezak]

I have a 2811 cisco with the basic ios software loaded
when i do a show flash i see the advanced ios software on the disk.
Can i and if so how do I load the advanced ios in the router from the flash.

Also does this c2800nm-advipservicesk9-mz.123-14.T6.bin
ios bin release support easy vpn?

thanks.

show flash:



-#- --length-- -----date/time------ path
1 14901852 Aug 17 2006 16:29:44 +00:00 c2800nm-ipbase-mz.124-3e.bin
2 1823 Aug 17 2006 16:40:30 +00:00 sdmconfig-2811.cfg
3 4734464 Aug 17 2006 16:41:08 +00:00 sdm.tar
4 833024 Aug 17 2006 16:41:32 +00:00 es.tar
5 1052160 Aug 17 2006 16:41:58 +00:00 common.tar
6 1038 Aug 17 2006 16:42:20 +00:00 home.shtml
7 102400 Aug 17 2006 16:42:38 +00:00 home.tar
8 491213 Aug 17 2006 16:42:58 +00:00 128MB.sdf
9 1684577 Aug 17 2006 16:43:32 +00:00 securedesktop-ios-3.1.1.27-k9.pkg
10 398305 Aug 17 2006 16:43:58 +00:00 sslclient-win-1.1.0.154.pkg
11 31857208 Sep 11 2006 18:39:24 +00:00 c2800nm-advipservicesk9-mz.123-14.T6.bin

7938048 bytes available (56078336 bytes used)

 

[brianinms]

Yes it supports easyvpn and you boot the other image by entering config mode and entering ...

boot system flash:c2800nm-advipservicesk9-mz.123-14.T6.bin

and then save the config and reboot.

 

[joeccie]

You can also delete the ipbase image and reboot. Please verify that your config register is set correctly and that you dont have any boot statments in your configurations.

Thanks,
Joe

http://certificationchat.com

 

[MrOyvind]

Swithes: Boot system flash:image.bin
Routers: Boot system flash image.bin

No colon on routers before image bin, but space.
My experience with 88x,18xx routers and 2950,2960 and 3560 switches.

Best regards,

Øyvind