Flash Memory

[Mountainbear]

Does anyone know of a simplified flash memory guide. I have several memory cards but would like to know their capabilities. I know you can't jump straight to a 7.1 from a lower version, and some are only 4x8 rather than 4x16. I would really like to understand what each version means. Or is it more complicated than that?

 

[allworxguy]

Check this
FAQ but you need to know the SP number.

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990

 

[curlycord]

Here is mine further down the FAQ list...

http://www.tek-tips.com/faqs.cfm?fid=6693

Its up to date and a little more info at the top.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[Mountainbear]

Thank you, still a little confusing but much better.

 

[curlycord]

In your photo it states SIP

S = Standard software which is 8X16/24
I = IRAD (Internal RAD)
P = Prompts (built in AA)

If you go to Maintenance SP code you will see something like
SP: 30DHC12

All you care about is the bold letters then compare to the chart:

DH=CICS 7.1 STD IRAD-ON+AA PROG PROMPTS (SIP)(8X16/24) C12

DH tells you its 7.1
C12 tells you what version of that release.

As it turns out Rls 1.0, 7.0 and 7.1 only had 1 version of its release where the others had 2or 3.


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca