Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
FLASH 1.5 software version with CICS software version 6.1?
- Thread starter IT222
- Start date
- Thread starter
- #3
That is what he is saying.
Flash 1.5 is not compatible with 6.1 ksu
David Brillert
Flash 1.5 is not compatible with 6.1 ksu
David Brillert
6.1 will work with 1.7 or better. I have tested this in my lab. I would go with 2.0 just to be sure you have the most stable version.
There is also a Flash 3.0, but all it gets you is backup copy to the PCMCIA card in case of hardware failure.
There is also a Flash 3.0, but all it gets you is backup copy to the PCMCIA card in case of hardware failure.
You'll need Flash software of V1.9 or higher to work with a R6.1 KSU. I just tried V1.7 with my test MICS R6.1 yesterday and the Flash could not detect the MICS.
Brian Cox
Brian Cox
- Status
Similar threads
- Locked
- Question
