Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Fixing LGCM's
- Thread starter billiho
- Start date
martinhodge
Vendor
for what system?
as you talking boards im assuming its for the older systems ipldks etc .
you can get them repaired in the uk by a company called multimessage.
but to be honest you can pick the boards up pretty cheaply second hand off ebay etc anyway .
or just ring around a few lg resellers they proberbly have bucket loads on the shelfs lol .
but tbh they are old systems and i would proberbly look at upgrading the customer .
as you talking boards im assuming its for the older systems ipldks etc .
you can get them repaired in the uk by a company called multimessage.
but to be honest you can pick the boards up pretty cheaply second hand off ebay etc anyway .
or just ring around a few lg resellers they proberbly have bucket loads on the shelfs lol .
but tbh they are old systems and i would proberbly look at upgrading the customer .
- Thread starter
- #3
LGCM modules are the analog line gateways for the LIK/UCP systems. Not sure but I think some of these have a common point of failure in the power supply section of the gateway board. I'd like to get these things fixed instead of just junking them. I've fixed LDK power supplies, and they seem to blow their power supply caps, and replaced the batteries on the LDK motherboards but not sure what's up with these gateways. I'm sure someone somewhere has fixed these.
- Thread starter
- #4
- Status