First Network Drive != F A Client for Netware setting

[1RobDog1]

I need to know where you can set the Client for Netware setting to designate the first network drive letter to F: and not E: which is what mine is setting it to. In Win9x you can set this in the properties for Client for Netware and tell it what drive letter to start with. There has to be away to do this in Win2kpro. Thank you so kindly for a reply...

-Robert
MIS [sig][/sig]

 

[theripper]

Robert -

If the client is installed, right click on the red "N" in your systray. There you will be able to change it.

However, keep in mind to double check your login script. It too may need to be changed.

Hope this helps ~ [sig][/sig]

 

[1RobDog1]

Thank you for the reply... Actually we are not using client32. Is there a way to do this another way without
using client32.

Thank you again,
-Robert [sig][/sig]

 

[theripper]

Robert -

If your connecting to a Novell box, you may want to install the 4.7 client (for Win2K) to allow you to utilize all the features.

You can also hit My Network Places --> Properties of your network. Highlight the client you are using and change the drive letter there.

You can also right click on My Network Places -->Map Network Drive, and select the 'Reconnect' option.

Hope this helps~

[sig][/sig]