I've got a ssII9300 3c93012 and it is stuck in a bootloop because of a wrong firmware update.
Can't get to management console.
If I hit enter at the second boot I get this message:
Usage: download Device Ip Address,Device Subnet Mask,Device Default Gateway,Load
Host IP Address,Load Filename,Port Number,Use Vlan Tagging(1/0),Vlan Tag,Auto N
egotiate (1/0),Flow Control(1/0),bootFlags(in hex),TcmpOn (1/0)
factoryreset
Example: download 158.23.2.1,255.255.0.0,158.23.0.254,116.42.10.4,cb9300.sys,5,1
,53,1,0,4100
I performed the factoryreset, but didn't work.
No I tried to download the old firmware to the switch...but keep getting the missing parameters error.
I've looked at thread545-522115 and they have the same problem.
I really don't know what parameters I need to put there.
And do i need a special program on my pc to get it work?
can somebody help me translate it so i know what to put there?
grtz Harm1978
Can't get to management console.
If I hit enter at the second boot I get this message:
Usage: download Device Ip Address,Device Subnet Mask,Device Default Gateway,Load
Host IP Address,Load Filename,Port Number,Use Vlan Tagging(1/0),Vlan Tag,Auto N
egotiate (1/0),Flow Control(1/0),bootFlags(in hex),TcmpOn (1/0)
factoryreset
Example: download 158.23.2.1,255.255.0.0,158.23.0.254,116.42.10.4,cb9300.sys,5,1
,53,1,0,4100
I performed the factoryreset, but didn't work.
No I tried to download the old firmware to the switch...but keep getting the missing parameters error.
I've looked at thread545-522115 and they have the same problem.
I really don't know what parameters I need to put there.
And do i need a special program on my pc to get it work?
can somebody help me translate it so i know what to put there?
grtz Harm1978