Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Firmware upgrade on VAL Board TN2501 1

Status
Not open for further replies.
qz01gs

qz01gs

Technical User
Jun 28, 2005
218
GB
When you upgrade the firmware on a val board does it wipe the existing announcements of the val board ?

THanks
 
Sort by date Sort by votes
It is not supposed to, but I would use VAL Manager to back it up anyway, then do the firmware upgrade. It is just he safe way to do it.

gblucas
 
Upvote 0 Downvote
ok should it be done out of hours

Thanks for the reply
 
Upvote 0 Downvote
It is service affecting so I would say yes.
 
Upvote 0 Downvote
I have never tried to do any firmware upgrades during normal business hours. After the upgrade, the card will be reset, so if there are any connections to the card, they will be reset as well. I recommend doing any firmware upgrades when the system is not being used. If you are a 24 hour call center, then you will need to schedule downtime to do the upgrades.

gblucas
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Question
Unable to Register Grandstream WP826 / 836 on Firmware 1.0.1.61 with Avaya AURA 10.x
Replies
0
Views
258
MaxLeopold
M
M
  • Locked
  • Question
AVAYA 1603SW Firmware for SIP
Replies
6
Views
875
Muller7777
M
M
  • Question
9608 2 Step FW Upgrade
Replies
0
Views
127
makers12
M
jaxuser
  • Locked
  • Question
J179/JEM24 firmware update message
Replies
5
Views
1K
murpr
murpr
JustinMB
  • Locked
  • Question
Need old FW for 9611G or need to bypass minimum FW requirements on upgrade.
Replies
0
Views
295
JustinMB
JustinMB

Part and Inventory Search

Sponsor

Back
Top