We are preparing to upgrade to 3.1.3. In the Communication Manager Software and Hardware Compatibility Matrix, they state the firmware version for TN2602s should be at 30. But at support.avaya.com, for 3.1.3, under the "Latest TN Circuit Pack, Media Server, and Media Gateway Firmware and Software Updates" they still show 25. TN799s in the matrix shows HW version pre-13 as 22, 13 as 21, but the highest level for download is 17. Should I be concerned?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
firmware matrix doesn't match download site
- Thread starter booman
- Start date
mikeydidit
IS-IT--Management
I would ask my BP or Avaya before they do the upgrade. They will probably look at it pretty close before hand, but they do miss some things.
Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison
For the best response to a question, read thread690-1323977
Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison
For the best response to a question, read thread690-1323977
- Thread starter
- #3
Here is the answer from Avaya. (I love finding stuff!)
Apparently the information provided to update the Compatibility Matrix for 3.1.3 is incorrect.
Those firmware versions apply to CM Release 4.0, which is not scheduled for GA until March 19th.
Here is the response I got back from the team that requests this content be posted on the site:
The Support site is correct. There are mistakes in the CM 3.1.3 Compatibility Matrix. The CM 3.1.3 Compatibility Matrix should have shown the following:
TN2602 F25 - F30 was incorrectly listed (F30 should be a CM 4.0 item).
TN799 F17 - HV pre-13: 22 & HV 13+: 21 were incorrect. For CM 4.0, we will be going to F24 for both.
The information given to the submitter to prepare the CM 3.1.3 Compatibility Matrix was misleading and unclear. It was a list of firmware posted on the CD for BOTH CM 3.1.3 and CM 4.0.
Apparently the information provided to update the Compatibility Matrix for 3.1.3 is incorrect.
Those firmware versions apply to CM Release 4.0, which is not scheduled for GA until March 19th.
Here is the response I got back from the team that requests this content be posted on the site:
The Support site is correct. There are mistakes in the CM 3.1.3 Compatibility Matrix. The CM 3.1.3 Compatibility Matrix should have shown the following:
TN2602 F25 - F30 was incorrectly listed (F30 should be a CM 4.0 item).
TN799 F17 - HV pre-13: 22 & HV 13+: 21 were incorrect. For CM 4.0, we will be going to F24 for both.
The information given to the submitter to prepare the CM 3.1.3 Compatibility Matrix was misleading and unclear. It was a list of firmware posted on the CD for BOTH CM 3.1.3 and CM 4.0.
- Status