Firmware for 39XX's 1

[steyler]

Can someone explain what the number in parenthesis is? See prt below

NPR000
.FSUM

**M3902 SUMMARY
080 - ON DISK

**M3903 SUMMARY
080 - ON DISK
080 (017 ) - 000001 SETS FOUND
083 (024 ) - 000001 SETS FOUND

**M3904 SUMMARY
083 - ON DISK
083 (024 ) - 000035 SETS FOUND
083 (018 ) - 000004 SETS FOUND
000001 SETS NOT RESPONDING

**M3905 SUMMARY
083 - ON DISK
083 (018 ) - 000367 SETS FOUND
032 (018 ) - 000005 SETS FOUND
083 (017 ) - 000006 SETS FOUND
000005 SETS NOT RESPONDING

Thanks.

 

[Skaret]

The format of the report is as follows:

** M390x SUMMARY REPORT **
dd - ON DISK
ff (cc) - nnnn SETS FOUND
ff (cc) - nnnn SETS FOUND

Where:
x = 2 to 5 for M3902 to M3905
dd = the flash firmware version found on the system disk
ff = the downloadable flash firmware version found on the sets
cc = the core firmware found on the sets
nnnn = the number of sets found with firmware version ff (cc)

 

[steyler]

Thanks Skaret.

 

[senk1s]

steyler give skaret a star !!
thats a great answer

 

[steyler]

Good idea. Done.

 

[steyler]

So here is the second part of this question. I have two switches that I am working on. In switch A when I look at ld 97 and prt fdl I get the following.

FDL DATA
SET TYPE: ALL
FRCE: NO
FVER: 00

In switch B I get the same thing

FDL DATA
SET TYPE: ALL
FRCE: NO
FVER: 00

While in switch A in ld 32 I do fsum and then fsum all and get the following..

fsum


**M3902 SUMMARY
080 - ON DISK

**M3903 SUMMARY
080 - ON DISK
080 (017 ) - 000001 SETS FOUND
083 (024 ) - 000001 SETS FOUND

**M3904 SUMMARY
083 - ON DISK
083 (024 ) - 000040 SETS FOUND
083 (018 ) - 000002 SETS FOUND
000001 SETS NOT RESPONDING

**M3905 SUMMARY
083 - ON DISK
083 (018 ) - 000366 SETS FOUND
032 (018 ) - 000007 SETS FOUND
083 (017 ) - 000006 SETS FOUND
000006 SETS NOT RESPONDING

fsum all gets
.fsum all

TYPE:3903 CUST:00 PDN:3129 TN:020 0 00 07 FW:080
TYPE:3903 CUST:00 PDN:3232 TN:036 0 12 11 FW:083
TYPE:3904 CUST:00 PDN:3134 TN:004 0 02 13 FW:083
TYPE:3904 CUST:00 PDN:3098 TN:004 0 03 13 FW:083
TYPE:3904 CUST:00 PDN:3127 TN:004 0 03 15 FW:083
TYPE:3904 CUST:00 PDN:3015 TN:004 0 05 02 FW:083
TYPE:3904 CUST:00 PDN:3137 TN:004 0 05 12 FW:083
TYPE:3904 CUST:00 PDN:3128 TN:004 0 05 13 FW:083
TYPE:3904 CUST:00 PDN:2470 TN:004 0 05 14 FW:083
TYPE:3904 CUST:00 PDN:3234 TN:004 0 05 15 FW:083
TYPE:3904 CUST:00 PDN:3018 TN:020 0 00 05 FW:083

in switch B I receive the following.
.fsum


**M3902 SUMMARY
080 - ON DISK

**M3903 SUMMARY
080 - ON DISK

**M3904 SUMMARY
083 - ON DISK

**M3905 SUMMARY
083 - ON DISK

.fsum all


.
Can someone explain what is causing one switch to ouptut more information than the other ? Thanks.

 

[LittleGremlins]

I have another question for you. In the example below, there are 7 sets with firmware 32 that should be upgraded to 83 - am I correct? if so, how to you determine which sets need to be upgraded? And should a person be concerned about the 6 sets not responding, and how to you determine which sets are not responding?

**M3905 SUMMARY
083 - ON DISK
083 (018 ) - 000366 SETS FOUND
032 (018 ) - 000007 SETS FOUND
083 (017 ) - 000006 SETS FOUND
000006 SETS NOT RESPONDING

 

[Jay2003]

Latest firmware is 87, This resolves some headset issues with Plantronic sets.

The 6 not responding may be configured but not connected, do an IDU if you know the TN's

Jay