Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Firewall Reset - VPN Issues

Status
Not open for further replies.

site4sure

IS-IT--Management
Aug 15, 2002
171
US
Hi Gang,

Our network administrator for a company I am consulting for, was fired a few weeks ago. Well the problem is, he didn't make note of passwords to certain devices on the network. One of them was a firewall in our Denver office. It was setup to VPN to our Casper office. The Casper office is our central office with all our servers etc. So, we reset the router, got the Internet working again, and I got the VPN setup. Now another note, we also did a major IP switch to the 192 private block. For some reason, thier entire network was using the 221.21.x.x address which DOES NOT belong to them at all. So we switched to the 192 business. Here is the weird thing, I got the VPN setup on both sides for Denver, it shows its up, and from Casper, I can see any device on the Denver network, however, Denver cannot see any device on our network, such as the mail server, can't even ping it, but can get to our firewall via internal ip. Any ideas or help? I need to get this resolved ASAP.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top