Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Firebox Edge x5 and Fireware 9.12

Status
Not open for further replies.
JBDynamics

JBDynamics

Programmer
Jan 6, 2010
1
US
Is it possible to use fbxinstall to upgrade a Firebox edge x5 (7.2.1 firmware) to fireware 9.12? I have a copy of fireware 9.12 and a firebox edge x5 and I was hoping that I could upgrade it, but for some reason even while connected via serial connection fbxinstall won't connect to my firebox. I have tried using the Quick Setup (WSM 9.0) and it still won't connect to my Firebox even after pressing the reset button while the power is off, holding the reset button and powering the x5 edge on, waiting for the orange light then letting go of the reset button and lastly doing power cycle. It doesn't find the firebox in the Quick setup, and I'm not sure what to do to upgrade my firebox.

Please Help,
Thanks,
JB Dynamics
 
Status
Not open for further replies.

Similar threads

Sameer258
  • Locked
  • Question
Need Help to Find ip and mac address with email who one open my email
Replies
0
Views
283
Sameer258
Sameer258
Tommy_T
  • Locked
  • Question
Sonic wall - Have an issue remotely connectioning VNC and SMB (and AFP) to one of the 2 ISP circuits
Replies
1
Views
245
nnaarrnn
nnaarrnn
Nitta84
  • Locked
  • Question
navigation slow and tcp syc/ack drop
Replies
0
Views
207
Nitta84
Nitta84
TheFireman2
  • Locked
  • Question
Help with Watchguard Firebox M200 setup as a TMG 2010 replacement with ASA 5515 as main firewall
Replies
1
Views
113
hairlessupportmonkey
hairlessupportmonkey
shmideo
  • Locked
  • Question
How to set up a wireless LAN on X5 interface TZ500
Replies
1
Views
82
shmideo
shmideo

Part and Inventory Search

Sponsor

Back
Top