Dial in through the internal modem (the seventh port). That will get you to the command prompt. Type mm. A banner will pop up that will have the serial number. It may have a prefix to it. For example 001-XXXXXX. Type in the 6 digits for the password. Once you are in the main menu, you can change the system password.
You can also connect a serial cable from the DB9 connector on the 007 to the com port of a PC and read the serial number using Hyperterminal. Settings are 1200 baud, 8-N-1. Password is br00k (0's are zeroes).
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.